Panel Unit/Housing Removal; Holder, Roller, Unit; Screws Securing Holder, Roller, Unit; Holder, Roller, Unit Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.3 Panel Unit/Housing Removal

This section describes steps for removing housing parts.

4.2.3.1 Holder, Roller, Unit

1. Remove "Spindle" (p213).
2. Remove the four decorative screws securing the "Holder, Roller, Unit" to
the main unit. (Refer to Figure 4-14.)
Decorative screw: 4 pcs.
3. Slide the "Holder, Roller, Unit" upward from the printer rear surface and
remove it outward. (Refer to Figure 4-15.)
Disassembly & Assembly
Figure 4-14. Screws Securing Holder, Roller, Unit
Disassembly Procedures
Screws
Figure 4-15. Holder, Roller, Unit Removal
Revision C
Holder, Roller, Unit
214