Pulling Out The Pcb Unit - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
Be careful not to pull the "PCB Unit" too hard and stretch the
C A U T I O N
harness when performing the following steps.
6. Remove the four screws securing the "PCB Unit" and pull the "PCB Unit"
toward you.
C.B.S. 3x6: 4 pcs.
Align the left and right ribs of the "PBC Unit" with the
position locators of the frame.
Disassembly & Assembly
Rib and Position Locator
C.B.S. 3x6
Disassembly Procedures
PCB Unit
Figure 4-32. Pulling Out the PCB Unit
Revision C
Rib and Position Locator
C.B.S. 3x6
227