Dell C9000 Series Networking Configuration Manual page 892

Power Management Mode:
Interface Inline Power
Max / Alloc
Watts)
--------- -------------
PeGi 2/1/2 30.00 / 15.00
Table 69. show power inline Field Description
Field Description
Interface Displays the linecard slot and port number.
Inline Power Max / Displays the maximum amount of power allowed for the port currently allocated to the
Alloc port when sufficient power is available. When sufficient power is not available for a
particular port, inline power is not supplied to that port. If you insert an extra power
supply, or when the priority of the port is sufficiently increased, the PSU the allocated
power to the port.
Inline Power Displays the amount of power that the connected device consumes.
Consumed
Class Displays the power classification of the connected device. If the device is powered up
properly, it displays, Class 0, 1, 2, 3, or 4.
Device Type Displays whether the device is Type 1 or Type 2.
PoE Port Priority Displays the priority assigned for the port (the default is low). See
Allocating PoE Power on an Interface.
LLDP Support Displays whether the power requested is via LLDP-MED extended power-via-mdi TLV
(displays as "LLDP-MED") or IEEE 802.3at power-via-mdi TLV (displays as "PowViaMDI").
Static
Inline Power Class
Consumed
(Watts)
------------ -----
15.00
• NO_DEVICE — if no device is present
• LEGACY — if a legacy device is connected.
• PD_S/C — if a short-circuit condition is detected.
• PD_OVRLD — if overload condition is detected.
NOTE: After device detection, the Class value received via 802.3 Power via MDI
takes precedence and displays here.
NOTE: After device detection, the Type value received via 802.3 Power via MDI
takes precedence and displays here.
NOTE: You can configure priority or it is received via 802.3 Power via MDI. The
user-configured priority always takes precedence. See the power inline
priority command in the Power Over Ethernet (PoE) chapter of the Dell
Networking OS Command Reference Guide.
Device PoE Port
Type Priority
------ --------
4 2 Low
Power over Ethernet (PoE)
LLDP
Support
-------
PowViaMDI
892