Dell C9000 Series Networking Configuration Manual page 824

Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

pe provision 20
cascade interface TenGigabitEthernet 1/12
Dell# show pe brief
-
Port Extenders Information
----------------------------------------------------------
PE-id
Status
----------------------------------------------------------
10
online
20
offline
Dell#show pe errors
PE-id: 10
PE MAC: a0:68:00:3f:92:bc
Interface Errors:
TenGigabitEthernet 1/12 - Error State
You may connect two PEs to a parent C9010 but only provision one PE with cascade ports. In this case,
only the PE connected to the lowest numbered cascade port comes online. In the following example,
PE 10 is provisioned with cascade ports 1/0, 8, and 12. However, only cascade ports 1/0 and 1/12 are
cabled to PE 10; port 1/8 is cabled to a different PE. As a result, only PE 10 comes online becomes it is
connected to the lowest numbered cascade port: port 1/0. Port 1/8 is placed in an error state and the PE
to which it connects does not come online.
Dell# show running-config pe
!
feature extended-bridge
!
pe provision 10
cascade interface TenGigabitEthernet 1/0,8,12
stack-unit 0 type C1048P
Dell# show pe
Maximum number of PE Units allowed: 40
Current number of PE units in the system: 1
Codes:
A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present,
PE-ID assigned: 10
Status: online
System Mac: 00:01:02:03:11:01
PE Up Time: 00:02:14
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 1/0(A),Te 1/8(I),Te 1/12(A)
Cascade LAG: Po 268(Up)
---------------------------------------------------------------------
Stack-id
Status
---------------------------------------------------------------------
0
online
Dell#show pe errors
PE-id: Not Assigned
PE MAC: 00:01:02:03:22:02
Interface Errors:
TenGigabitEthernet 1/8 - Error State
Stack-size
Type
1
C1048P
1
C1048P
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
Reason
Type
-
C1048P
--
System-MAC
a0:68:00:3f:92:bc
00:00:00:00:00:00
UnitMac
00:01:02:03:11:01
No. of Ports
52
Port Extenders (PEs)
824

Advertisement

Table of Contents
loading

Table of Contents