Table of Contents
Advertisement
•
Set a time interval after which a RADIUS host server is declared dead.
CONFIGURATION mode
radius-server deadtime seconds
•
seconds: the range is from 0 to 2147483647. The default is 0 seconds.
•
Configure a key for all RADIUS communications between the system and RADIUS server hosts.
CONFIGURATION mode
radius-server key [encryption-type] key
•
encryption-type: enter 7 to encrypt the password. Enter 0 to keep the password as plain text.
•
key: enter a string. The key can be up to 42 characters long. You cannot use spaces in the key.
•
Configure the number of times the system retransmits RADIUS requests.
CONFIGURATION mode
radius-server retransmit retries
•
retries: the range is from 0 to 100. Default is 3 retries.
•
Configure the time interval the system waits for a RADIUS server host response.
CONFIGURATION mode
radius-server timeout seconds
•
seconds: the range is from 0 to 1000. Default is 5 seconds.
To view the configuration of RADIUS communication parameters, use the show running-config
command in EXEC Privilege mode.
Monitoring RADIUS
To view information on RADIUS transactions, use the following command.
•
View RADIUS transactions to troubleshoot problems.
EXEC Privilege mode
debug radius
TACACS+
The system supports terminal access controller access control system (TACACS+ client, including support for
login authentication.
Configuration Task List for TACACS+
The following list includes the configuration task for TACACS+ functions.
•
Choosing TACACS+ as the Authentication Method
•
Monitoring TACACS+
Security
996
Advertisement
Table of Contents
Troubleshooting
