Transmission Cover - Toro GreensPro 1200 Service Manual

Transmission Cover

Removal
(Figures 77 and 78.)
1. Park machine on a clean, level surface with the
transport wheels in the raised and locked position.
Make sure engine is OFF. Remove spark plug wire
from spark plug.
1
Figure 77
2. Remove lock nut (2), two flat washers (3), and cap
screw (4).
3. Tilt seat and seat pan (1) forward.
6
Figure 78
4. Remove cap screw (5) that secures transmission
cover (6) to support frame.
5. Remove transmission cover (6) from machine.
GreensPro 1200
2 3 4
5
Page 5 - 41
Installation
(Refer to Figures 77 and 78.)
1. Install transmission cover (6) to machine and secure
with cap screw (5).
2. Lower seat platform.
3. Secure seat platform with lock nut (2), two flat
washers (3), and cap screw (4).
Chassis