Service And Repairs; Steering Wheel - Toro GreensPro 1200 Service Manual

Service and Repairs

Steering Wheel

Removal
(Figure 16.)
1. Park machine on a clean, level surface with the
transport wheels in the raised and locked position.
Make sure engine is OFF. Remove spark plug wire
from spark plug.
Figure 16
2. Remove steering wheel cap (1).
3. Remove steering wheel bolt (2), lock washer (3),
and flat washer (4).
4. Remove steering wheel (5) from upper steering
shaft (7).
5. Remove steering shaft cover (6) from upper steering
shaft (7).
6. Repair or replace parts as necessary.
Chassis
1
2
3
4
5
6
7
Page 5 - 12
Installation
(Refer to Figure 16.)
1. Install steering shaft cover (6) over upper steering
shaft (7).
2. Install steering wheel (5) on upper steering shaft (7).
3. Install flat washer (4), lock washer (3), and steering
wheel bolt (2). Tighten steering wheel bolt (2) to
225 in-lb (25.4 N·m).
4. Install steering wheel cap (1).
GreensPro 1200