Service And Repairs; Engine - Toro GreensPro 1200 Service Manual

Service and Repairs

Engine

Removal
(Figures 2 through 8.)
1. Park machine on a clean, level surface with the
transport wheels in the raised and locked position.
Make sure engine is OFF. Remove spark plug wire
from the spark plug.
2. Close the fuel shutoff valve.
3. Remove transmission cover from machine (see
Transmission Cover in the Service and Repairs section
of Chapter 5 - Chassis).
1 2 3 4
Figure 2
4. Remove two nuts (1), two washers (2), two cap
screws (3), and four spacers (4).
5
Figure 3
5. Remove three lock nuts (6), three cap screws (7),
and six flat washers (8).
GreensPro 1200
6 7 8
Page 3 - 5
6. Remove rear support frame (5).
9 10 11
Figure 4
9 10 11
Figure 5
NOTE: Cap screws (10) can be accessed through
holes in the frame.
7. Remove lock nuts (9), cap screws (10), and flat
washers (11).
8. Remove the engine.
Gasoline Engine