Toro GreensPro 1200 Service Manual page 22

12
9. Remove two lock nuts (13), flat washers (14), and
cap screws (15), and remove drive coupling (12).
NOTE: Machines with serial numbers above
313000000 include an engine that has a different
output shaft and collar than earlier machines. Use the
procedure that matches your engine collar assembly.
15
15. Engine (machine serial number below 313000000)
16. Square key
17. Engine collar
18. Set screw
10. For machines with
313000000, measure and record the distance from the
end of the engine collar (17) to the engine cover before
removing the collar to ensure correct installation.
Loosen set screw (18) and remove engine collar (17)
and square key (16).
Gasoline Engine
13 14 15
Figure 6
16
18
Figure 7
serial numbers
19
19. Engine (machine serial number above 313000000)
20. Square key
21. Engine shaft spacer
22. Engine collar
23. Flat washer
24. Lock washer
25. Socket-head cap screw
11. For machines
313000000, remove socket-head cap screw (25), lock
washer (24), and flat washer (23), and remove engine
collar (22), engine shaft spacer (21), and square key
(20).
17
below
Page 3 - 6
20
22
21
23
Figure 8
with serial numbers
GreensPro 1200
24
25
above