Toro GreensPro 1200 Service Manual page 44

Installation
(Figures 26 and 27.)
1
Figure 26
1. Apply thread sealant tape to threads of straight
fittings (1) that will be threaded into the oil filter
assembly (2).
4 5
3
2
Figure 27
2. Install the oil filter assembly (2) onto bracket using
two cap screws (4), lock washers (5), and flat washers
(6).
3. Remove plugs that were installed in hoses and
fittings during the removal process.
4. Using labels placed during removal, attach hoses (3
and 7) to fittings on the oil filter assembly.
5. Fill oil tank with new oil. (Refer to Operator's
Manual.)
6. Install and secure
Transmission Cover in the Service and Repairs section
of Chapter 5 - Chassis).
7. Lower and secure seat platform.
8. Operate machine. Check oil level and adjust if
necessary. Check components for leaks. Tighten any
Hydraulic System
2
1
6
7
transmission cover (see
loose connections.
Page 4 - 20 GreensPro 1200