Toro GreensPro 1200 Service Manual page 36

30
29
Figure 15
12. Remove plugs that were installed in hoses and
fittings during the removal process.
13. Using labels placed during removal, attach oil
hoses (29 and 30) to fittings on the transmission
assembly. Tighten hose swivel nuts to 24 lb-ft (32 N·m).
14. Adjust drive chain tension and lubricate chain.
®
(Refer to Operator's Manual.) Dri-Slide Multi-Purpose
Lubricant (or equivalent) is recommended for chain
lubrication.
After drive chain adjustment, the drive chain should
have 0.200 in. to 0.300 in. (5 to 8 mm) deflection at
mid-span between sprockets.
15. Fill oil tank with new oil. (Refer to Operator's
Manual.)
16. Install and secure transmission cover (see
Transmission Cover in the Service and Repairs section
of Chapter 5 - Chassis).
17. Lower and secure the seat platform.
18. Operate machine. Check oil level and adjust if
necessary. Check components for leaks. Tighten any
loose connections.
19.Raise machine onto transport wheels, check
transmission return to neutral setting and adjust as
necessary. (See HYDRO-GEAR BDR SERVICE AND
REPAIR MANUAL.)
Hydraulic System Page 4 - 12 GreensPro 1200