Cub Cadet RZT-S Zero Shop Manual page 21

Figure 2.27
Torx screw
Hex screw
Figure 2.28
Figure 2.29
10. Remove the two screws, indicated by the arrows in
Figure 2.27, that hold down the front battery tray
using a 1/2" wrench.
11. Slide the battery tray out of the seat box assembly.
12. Remove the hex screw from the front of the seat box
assembly using a 1/2" wrench. See Figure 2.28.
13. Remove the two pan head screws using a T-40 torx
driver.
14. Remove the hex screw, indicated by the arrows in
Figure 2.29, that holds the left side of the front main
seat box assembly to the frame using a 1/2" wrench.
Body
17