Pre-Delivery Checklist - Cub Cadet RZT-S Zero Shop Manual

CUSTOMER NAME_____________________________
ADDRESS____________________________________
CITY_________________________________________
STATE________________________ZIP____________
HOME PHONE NUMBER________________________
ELECTRIC MOTORS:
RH HUB MOTOR SERIAL NUMBER_____________________
LH HUB MOTOR SERIAL NUMBER_____________________
RH DECK MOTOR SERIAL NUMBER____________________
LH DECK MOTOR SERIAL NUMBER____________________
Manuals Complete: (Use Operator Manual and related
manuals during checks).
 Owners Manual.
 Charger Manual.
 Attachment Manual (If Applicable).
Battery & Connections:
 All 4 batteries installed.
 Date installed marked on all 4 batteries.
 Battery charger included.
Tires & Wheels:
 Check and adjust pressure in tires.
Rear (8-10 p.s.i.). Front casters (20-25 p.s.i.).
Rear tires may require measurement of circumfer-
ence to obtain even tracking.
 Torque wheel bolts to 50-70 ft. lbs.
Check Lights & Indicators:
 Check the headlight.
 Check the Vehicle Control Module.
Grease Pivot Points:
 Axle casting - 4 points.
 Front wheels - 2 points.
Final Inspection:
 Check for missing or loose fasteners & decals.
 Clean / polish. Check overall appearance.
 Place manuals in an appropriate location (Under
Seat) at conclusion.
 Place deck wash hose coupler in an appropriate
location.
Customer Signature____________________________________________________________Date______________
Service Technician Signature_____________________________________________________Date_____________
Pre- Delivery Check List
RZT-S Zero SERIES
MODEL NUMBER______________________________
SERIAL NUMBER______________________________
IF APPLICABLE:
ATTACHMENT MODEL NUMBER_________________
ATTACHMENT SERIAL NUMBER_________________
CHECK-ADJUST AS REQUIRED. Inspection time for these
checks are not reimbursable under warranty. Repairs that are
determined to be necessary due to defects in material or work-
manship are reimbursable under warranty.
Pivot Bar:
 Standard operation.
 Install steering wheel per the Assembly Instruction
Manual.
 Check steering operation, full left turn, full right turn.
PTO / Deck Set Up:
 Level deck side to side.
 Adjust deck front to rear (1/8" to 1/4" lower in front).
 This units contains four (4) safety inputs. Refer
to the Operator's Manual, Safety Interlock Switches
for proper operation & operation combinations.
The switches are as follows: Blade start/stop knob,
brake switch, seat switch and a throttle position
switch.
Brake Function:
 Verify proper parking brake performance. Refer to
Service Manual to adjust brakes.
Seat Installation:
 Install seat per the Assembly Instruction Manual.
Batteries
Battery #1 Serial Number_________________
Battery #2 Serial Number_________________
Battery #3 Serial Number_________________
Battery #4 Serial Number_________________
769-08273
09/01/12