Cub Cadet RZT-S Zero Shop Manual page 123

Positive lead
Contactor assembly
Figure 6.6
positive lead
Figure 6.7
Nuts
Figure 6.8
1b. Disconnect the battery pack's positive lead from
the contactor assembly using a 7/16" wrench.
See Figure 6.6.
The battery pack's positive lead is
! CAUTION ! CAUTION
still hot. Take measures, such as
taping up the cable lug with electri-
cal tape or a plastic bag, to prevent the cable
end from making contact with any metal sur-
face on the mower. See Figure 6.7.
2. Disconnect the seat switch.
3. Remove the two nuts that secure the seat bracket to
the mower using a 1/2" wrench. See Figure 6.8.
4. Lift the seat and seat bracket off of the mower.
Battery Pack and Charger
119