Table of Contents
Advertisement
KNX Technical Reference Manual
®
ABB-i-Bus
-KNX Millenium
Pos: 31.9.1 /DinA-4 -- Online/1.1
Überschrift/Applikations-/Parameterbeschreibungen/Applikation „Bedienungseinstellungen" — Zusatz Millennium-RTR @ 41\mod_1422465315827_15.docx @ 330537 @ 2 @ 1
11.4
Additional Millennium RTC – Application "Control settings"
Pos: 31.9.2 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Allgemein – Rücksprung in die Primärfunktio @ 41\mod_1422465671496_15.docx @ 330571 @ 3 @ 1
11.4.1
General – Jump-back to the primary function
Options:
The parameter is used to specify the time period of non-operation after which there is a jump-
back to the first function of the rotary control element.
Pos: 31.9.3 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Temperaturanzeige – Temperatureinheit @ 41\mod_1422465983204_15.docx @ 330587 @ 3 @ 1
11.4.2
Temperature display – Temperature unit
Options:
This is where the temperature unit is selected for the display on the device. The parameter is
used to choose between Celsius (°C) and Fahrenheit (°F).
Pos: 31.9.4 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Temperaturanzeige – Einstellung der Temperatureinheit über Objekt @ 41\mod_1422466137443_15.docx @ 330603 @ 3 @ 1
11.4.3
General - Setting the temperature unit via object
Options:
The parameter is used to define whether the temperature unit adjustment is transmitted via an
object.
Pos: 31.9.5 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Temperaturanzeige – Sollwertanzeige @ 41\mod_1422466275037_15.docx @ 330619 @ 3 @ 1
11.4.4
General - Setpoint display
Options:
The parameter is used to define whether the absolute or the relative setpoint is displayed.
Pos: 31.9.6 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Temperaturanzeige – Anzeige der Ist-Temperatur @ 41\mod_1422466426078_15.docx @ 330635 @ 3 @ 1
11.4.5
General - Display of actual temperature
Options:
If the actual temperature is to be shown on the display, the parameter must be set on active.
The device will then primarily display the actual temperature. When actuating the rotary control
element the display changes to the setpoint adjustment. After non-actuation of the device the
current actual temperature again appears in the display after the set waiting period.
KNX Technical Reference Manual | 1473-1-8681
Description of applications /
5 s
10 s
20 s
30 s
1 min.
2 min.
3 min.
°C
°F
No
Yes
Absolute setpoint (e.g. 21°C)
Relative setpoint (e.g. -5°C to +5°C)
No
Yes
objects
— 71 —
Advertisement
Table of Contents
