Change Into Eco Mode; Individual Button Function - ABB -i-Bus-KNX Millenium Reference Manual

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
8.8

Change into ECO mode

This mode can be used to automatically set a preset temperature, and, if required, a fan speed level. This means
that during absence, for example, the temperature is adjusted downward.
1. Press the "ECO mode" button (4).
The device switches to the "ECO mode (absence)" state.
2. After a renewed press of the "ECO mode" button the
device returns to the settings that were active prior to the
activation of ECO mode.
Note
• During ECO mode the temperature cannot, for example, be adjusted manually.
• The function and setting of ECO mode is adjustable via parameters.
The default setting can not be adjusted via the rotary control element.
8.9

Individual button function

The button (3) can be individually programmed with abutton
function.
- Operation is carried out with a short or long press of the
button.
- The stored functions are not shown in the display.
After the set time, or when the rotary control element is
actuated, the device changes back to the "Setpoint
adjustment".
KNX Technical Reference Manual | 1473-1-8681
Operation
1 2 3
ECO
6 5 4
Fig. 14: Device in ECO mode
1 2 3
6 5 4
Fig. 15: Individual button function
— 27 —