KNX Technical Reference Manual
®
ABB-i-Bus
-KNX Millenium
Pos: 31.11.1 /DinA-4 -- Online/1.1
Überschrift/Applikations-/Parameterbeschreibungen/Kommunikationsobjekte — RTR @ 41\mod_1422464590262_15.docx @ 330520 @ 2 @ 1
11.5
Communication objects - RTC
Pos: 31.11.2 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Stellgröße Heizen @ 41\mod_1422460560200_15.docx @ 329734 @ 3 @ 1
11.5.1
Heating control value
Number
1
Description:
1. This object is used to operate a switching actuating drive, e.g. a thermoelectric positioner,
that is controlled by a switching/heating actuator.
2. This object is used to control an actuating drive with a continuous input value (0%..100%),
e.g. an electromotive actuating drive.
Pos: 31.11.3 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Zusatzstufe Heizen @ 41\mod_1422460646672_15.docx @ 329750 @ 3 @ 1
11.5.2
Additional heating stage
Number
2
Description:
1. This object is used to operate a switching actuating drive, e.g. a thermoelectric positioner,
that is controlled by a switching/heating actuator.
2. This object is used to control an actuating drive with a continuous input value (0%..100%),
e.g. an electromotive actuating drive.
Note
The additional stage can also be used as a parallel second heating stage. To do
this, set the parameter for the temperature difference to the basic stage to 0°C.
Pos: 31.11.4 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Stellgröße Kühlen @ 41\mod_1422460706343_15.docx @ 329766 @ 3 @ 1
11.5.3
Cooling control value
Number
3
Description:
1. This object is used to operate a switching actuating drive, e.g. a thermoelectric positioner,
that is controlled by a switching/heating actuator.
2. This object is used to control an actuating drive with a continuous input value (0%..100%),
e.g. an electromotive actuating drive.
Pos: 31.11.5 /Systemmodule/++++++++++++++ Seitenumbruch +++++++++++++++ @ 41\mod_1422789416992_0.docx @ 333487 @ @ 1
KNX Technical Reference Manual | 1473-1-8681
Name
Heating control value (control
value heating/cooling)
Name
Additional heating stage
(additional heating/cooling stage)
Name
Cooling control value
Description of applications /
Object function
Data type
Output
1. Switching
2. Percent (0 to
Object function
Data type
Output
1. Switching
2. Percent (0 to
Object function
Data type
Output
1. Switching
2. Percent (0 to
objects
100%)
100%)
100%)
— 74 —