Indications In The Display; Led Colour Concept; Explanation; Push-Buttons - ABB -i-Bus-KNX Millenium Reference Manual

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
8.2

Indications in the display

Display Display
21,0 °C
Set-point temperature / room temperature controller
activated
• White: Set-point temperature = actual temperature
• Blue (cooling, colder): Set-point temperature > actual
temperature
• Orange (heating, warmer): Set-point temperature < actual
temperature
(A)
3
Automatic ventilation (display of fan speed level plus A)
0
Ventilation off/standby
1
Manual ventilation (display of fan speed level)
5
Room temperature controller is deactivated
ECO
Eco mode
Alarm
Frost protection / heat protection
Condensate
Standby mode
Dew point
Nighttime temperature reduction
8.3

LED colour concept

8.3.1

Explanation

Colour Meaning
White Set-point temperature = actual temperature
Blue Set-point temperature > actual temperature
Orange Set-point temperature > actual temperature
Green Eco mode
White Alarms and operating modes
8.3.2

Push-buttons

The buttons are permanently backlit in white. The backlighting can be deactivated via a parameter setting. Also
the day / night mode can be activated in Power-Tool via a parameter setting. This allows the switchover between
bright (day) and darkened backlighting (night).
When the device is deactivated, the backlighting of the buttons remains deactivated until the device is activated
again.
KNX Technical Reference Manual | 1473-1-8681
Action of the device
–
No adjustment required
Reduce set-point temperature
Raise set-point temperature
–
–
–
–
–
–
–
–
–
–
–
Operation
— 23 —