More About View - Honeywell Rapid Eye Operator's Manual

Running View

More About View

28
Honeywell Video Analytics sessions can be run:
• While running the View application. Use the Analytics icons (see
View application's toolbar to start the corresponding Analytics session.
• After letting the operator run View once, to register his Rapid Eye account, that
operator has the option of clicking Start

Analytics [type of session].
It is usually best to use the Configuration Tool first, to set up Honeywell Video Analytics
objects, making the Forensics session more useful. For an introduction to Honeywell Video
Analytics, see the
Video Analytics: Getting Started
Using this Document
The View procedures that you will use most often are documented in this user guide. They
are grouped by tasks, so that you may start using View as quickly as possible. Reference
information is also included, as needed, usually at the end of subsections.
Other Guides
The Read Me First, 800-02346, contains release notes and is available on the View
Operator's PC, by clicking:

Start All Programs
Me First
Web Site
Look for Rapid Eye products at http://www.honeywellvideo.com.
Technical Support
For installation questions, or for ordering and parts information, have your Multi SA contact
the vendor or distributor of the system. For software training, or for reporting a malfunction,
the Multi SA can call Honeywell Multi-Media Technical support at 1 (800) 796-2288.

All Programs
Guide, publication number 800-00923.

Rapid Eye Multi-Media 9.0
1-2) on the
Table

Honeywell Video
 
Documentation Read