Recorded Audio; Setting Up - Honeywell Rapid Eye Operator's Manual

Recorded Audio

TIP!

Setting Up

Document 800-07767 Rev A
02/11
Talk Button Availability
When two or more View operators start live sessions at one Multi-Media site, only the first
operator to connect to the site will have the Talk button available. The Talk button on other
View operators' PCs is unavailable until the first user disconnects. When two View operators
start live sessions at different Multi-Media sites, each can use the Talk button, unless one
is logged into the other site as well.
If an operator is running a Maintenance session, the Talk button in Maintenance overrides
use of audio in a Live session.
LocalView
At sites where LocalView is in use, one channel of audio can be reserved for onsite use.
View operators using these sites can use only the remaining channel of audio.
See also on page
Live Video
on page
from POS Hardware
Recorded audio is available along with video when performing a retrieval session. Your
Multi-Media system administrator (Multi SA) can inform you about which Multi-Media sites
are set to record audio.
The recording of audio can be unlawful. Check your right to do so with a legal
authority.
See also
Recorded Video
Audio setup is performed during a Maintenance session. Microphones, speakers, and so
on are needed for audio, both at the operator's station and at the Multi-Media site. For audio
setup procedures, see the
Guide, and the
Rapid Eye™ Multi-Media Digital Video System Administrator
Rapid Eye Remote View Operator Guide
for more information on live video, and
29
for data.
131
on page 49.
Rapid Eye™ Multi-Media Digital Video Recorder Installation
Live Data Messages
Guide.
111