Running An Alarm Session; Acknowledging An Alarm; Figure 6-8 Alarm Session Components - Honeywell Rapid Eye Operator's Manual

Alarms from Events

Running an Alarm Session

Acknowledging an Alarm

TIP!
86
Figure 6-8 Alarm Session Components
To view video from the
time of the alarm
1. Using View, select a site on the Sites list.
2. Do one of the following:
• Select the site and click
• Right-click on the site name and click Alarm on the shortcut menu.
- or -
• Select the site and click Alarms on the Actions menu.
3. If a Connections dialog appears, choose the network or dial-up connection and click
OK. An alarm window is displayed in the session pane (see
Connections dialog does not appear if there is only one connection option.
1. Start an alarm session or switch to one (see
information).
2. Select an alarm. A red, octagonal, status icon (
(see
Figure 6-8).
3. To acknowledge the alarm, click ACK (acknowledge). Its icon changes from red to
blue, and takes its chronological place in the acknowledged part of the list. If other
alarms remain unacknowledged, an alarm may keep ringing.
Clicking ACK ALL acknowledges all of the alarms at once.
on the toolbar.
Figure
on page
Alarm Session
) identifies unacknowledged alarms
Alarm
session in
tear-away
window
List of
alarms
6-8). A
for more
85