Controlling A Ptz Camera Using The Dartboard; Figure 2-15 Ptz Dartboard Control Commands - Honeywell Rapid Eye Operator's Manual

Live Video

Controlling a PTZ Camera Using the Dartboard

44
For a reminder of what an area of the dartboard can do, watch the PTZ tip as you surf the
dartboard with the mouse pointer (see
• Click. The duration of PTZ commands is fixed and depends on the inner ring that is
chosen. Watch the PTZ tips change as the mouse pointer surfs the dartboard.
• Hold. PTZ commands last as long as the mouse button is held.
• Speed. Clicking the inner circle of the PTZ controller cycles the control speed through
Slow, Medium, Fast, back to Slow, and so on. In Click style, the Speed setting
changes the duration of commands. In Hold style, the setting changes the speed of
the camera's response to commands.
1. On the PTZ Control, the Click button is selected by default when the control appears
(see or
Figure 2-14 Figure
the Hold option, holding the mouse button down makes the command last as long as
it's needed.
2. Move the mouse pointer over the dartboard to highlight areas of the dartboard. Each
area on the dartboard offers a PTZ tip in the box below the controls. When the
command that you need is highlighted, click the mouse button (see
the mouse pointer is not on the dartboard, no PTZ tip is shown. If auto-iris is not
supported, only one black dot appears in the arc for Iris on the dartboard.
Figure 2-15 PTZ Dartboard Control Commands
Zoom arc
Continuous
panning
Pan
Iris arc
Auto-iris
PTZ tip
The Zoom, Focus, and Iris Rings
• Zoom. On the dartboard, use the left side of the Zoom arc (–) to zoom out and the
right side of the Zoom arc (+) to zoom in (see the Zoom arc in
• Focus. On the dartboard, use the left side of the Focus arc (–) to focus out and the
right side (+) to focus in. If auto-focus is supported by the camera, two black dots
appear in the Focus arc and the auto-focus command is between the two dots.
• Iris. On the dartboard, use the left side of the Iris arc (–) on the dartboard to close the
iris and the right side (+) to open the iris. If auto-iris is supported by the camera, two
black dots appear in the Iris arc and the auto-iris command is between the dots (see
auto-iris in
Figure 2-15).
• Pan. When the Click option is in use, the outer Pan areas send a continuous panning
command to the PTZ camera.
Figure 2-15).
2-15). You have the option of clicking the Hold button. With
Focus arc
2-15). If
Figure
Speed
Figure 2-15).