Clip Name Reference; Table 7-1 Default Format For Multi-Media Clip Names - Honeywell Rapid Eye Operator's Manual

TIP!

Clip Name Reference

Document 800-07767 Rev A
02/11
5. When all the video you need is recorded, click
dialog is displayed.
6. As you would with any file, name the clip and choose a folder to store the clip in. The
clip is stored as a *.rem file and the Save As dialog is closed.
7. You have the option of ending the session (see
Making a clip of recorded video at a faster speed does not affect clip playback.
Caution Honeywell recommends storing stills and clips in their own folder.
Clips and stills can be erased routinely after use, making it easy to erase
other files by mistake. Storing clips and stills in a folder other than View's
application folder (the default folder for clips and stills) prevents the
deletion of View system files.
explains each part of a clip's filename, using as an example:
Table 7-1
Main Unit_RTZ_20090124_133114.REM. Note the .REM file extension.
Table 7-1 Default Format for Multi-Media Clip Names
a
Example
Main Unit
RTZ
2009
01
24
13
31
14
.rem
REM File
a
See the clip listed in Figure 7-2 (page
Renaming a Clip
You have the option of renaming clips (see
the .REM file extension is recommended.
Rapid Eye Remote View Operator Guide
again. A Save Recorded Clip to File
Ending a Retrieval
Format Element
Site name
Time reference
Four digit year
Two digit month
Two digit day
Two digit hour, 24-hour clock
Two digit minute
Two digit second
Microsoft Windows file extension
File type in Microsoft Windows' Explorer
100).
Making a Clip of Live Video
Session, page 58).
on page 98). Leaving
99