Watching Site Tours; Running A Site Tour; Figure 9-1 Site Tour Information Is Displayed In The Title Bar - Honeywell Rapid Eye Operator's Manual

Watching Site Tours

Running a Site Tour

Document 800-07767 Rev A
02/11
Like most of the Multi-Media security features, use of site tours is optional. Your
Multi-Media system administrator (Multi SA) presets which sites (if any) are part of a tour.
Multi-Media View operators can consider these guidelines as suggestions. They are
intended to complement your organization's security policies and procedures.
Figure 9-1 Site Tour Information Is Displayed in the Title Bar
Site tour
name is Day
watch.
Process
Site Tour acts like a security guard, electronically visiting sites in a sequential order. Once
each site has been configured in the Multi-Media Admin software to be part of the Site
Tour, you can connect and view the images on all available cameras at each of the sites
in the list. The duration specified in the Admin software limits the amount of time that you
can spend monitoring each site.
1. Click the Tours tab in the Multi-Media View window. Tours that are listed have been
set up using the Admin application.
Countdown of time (in minutes:seconds)
remaining at this site before the tour
displays the next site.
Tour
buttons:
Suspend,
Resume and
Advance to
the next site.
9
115