Recording Indicator On The Resolution Gauge; Figure 2-8 Location Of The Resolution Gauge; Figure 2-9 Resolution Gauge For A Pal Camera During Live Sessions - Honeywell Rapid Eye Operator's Manual

Recording Indicator on the Resolution Gauge

Document 800-07767 Rev A
02/11
Figure 2-8 Location of the Resolution Gauge
Figure 2-9 Resolution Gauge for a PAL Camera During Live Sessions
Large camera windows for Live sessions
automatically use higher resolution
Indicator of live resolution (PAL)
Gauge for recorded frame rate (shown
empty when camera is not recording)
This camera's video feed is not being
recorded (no red bar)
Note If there is no video feed, the resolution gauge is not displayed.
The lower-left corner of the resolution gauge is red if the video feed is being recorded (see
or 2-9). The meter in the lower right-hand corner of the resolution gauge
Figure 2-7 Figure
shows whether the recording resolution is low or high. If the feed is not being recorded, the
gauge remains empty.
Recorded Video
The resolution of recorded video does not change when the View application optimizes the
resolution of live video. The resolution for recording video is set by your organization's Multi
SA (see
Resolution of Recorded Video
Rapid Eye Remote View Operator Guide
on page 56).
Resolution
gauge
35