Creating A Self-Executable Clip; Figure 11-9 Save Recorded Clip To File - Honeywell Rapid Eye Operator's Manual

Creating a Self-Executable Clip

Document 800-07767 Rev A
02/11
Figure 11-9 Save Recorded Clip to File
Caution Honeywell recommends storing stills and clips in their own folder.
Clips and stills can be erased routinely after use, making it easy to
erase other files by mistake. Storing clips and stills in a folder other
than View's application folder (the default folder for clips and stills)
prevents the deletion of View system files.
Note Clips recorded with this method will only play back on stations with the
Remote View software installed. See
to create a file that can play on PCs without the Remote View software
129
installed.
Note See
Chapter 7, Clips and
and playing back saved clips.
To create a self-executable clip that will play back on PCs without the Remote View software
installed, you must first select the self-executable file as the clip type:
1. Open the File menu and click Select Clip Type.
2. Select the SelfExecutable Clip option (see
Note This option is only available when playing back video from an archival policy.
Other retrieval sessions will not offer this option.
Rapid Eye Remote View Operator Guide
Creating a Self-Executable Clip
Stills, for more information on saved clip options
Figure 11-10).
on page
129