More About View - Honeywell Rapid Eye Operator's Manual

Running View

More About View

28
Note Use of an HVA command on a unit without HVA only produces a message.
Availability of LocalView on Rapid Eye V9 Units Offering Video Analytics
LocalView is now fully supported by Rapid Eye's latest V9 software. Earlier V9 software
cannot access full LocalView features; only network configuration is available. Visit
www.honeywellvideo.com/support/downloads/downloads_dvr.html
Rapid Eye software.
Availability of LocalView on Rapid Eye V8.1 Units Offering Video Analytics
On Rapid Eye v8.1 units offering Video Analytics, LocalView can only be used to change
the unit's network settings. Use the Admin and Remote View applications to monitor video
and make all other configuration changes.
Learning Rapid Eye Multi-Media View
The View procedures that you will use most often are documented in this user guide. They
are grouped by tasks, so that you may start using View as quickly as possible. Reference
information is also included, as needed, usually at the end of subsections.
Other Guides
The Read Me First, 800-02346, contains release notes and is available on the View
Operator's PC, by clicking:
Start All Programs
Me First
Web Site
Look for Rapid Eye products at http://www.honeywellvideo.com.
Technical Support
For installation questions, or for ordering and parts information, have your Multi SA contact
the vendor or distributor of the system. For software training, or for reporting a malfunction,
the Multi SA can call Honeywell Multi Technical support at 1 (800) 796-2288.
Rapid Eye Multi-Media 9.0
to download the latest
Documentation Read