Excluding An Area From A Search; Search Report - Honeywell Rapid Eye Operator's Manual

Excluding an Area from a Search

Search Report

Document 800-07767 Rev A
02/11
Show Grid. Toggle to display a grid overlay, to help select the area(s) used to search for
motion. Works like the Show / Hide masking grid button.
Set All. Covers the entire area of a video image with a mask. The mouse can then be used
to remove part of the mask, as needed. When used with the Invert Mask command, small
areas can be excluded from a search (see
Clear All. Removes all masks from the image area. The mouse can then be used to add
new masks.
Invert Mask. Unmasks masked areas, and masks unmasked areas.
Masking a Larger Area with One Click
Press and hold the key on the PC's keyboard, then click the larger image. A larger mask
Ctrl
(3x3 blocks) is inserted.
Note for the Multi-Media System Administrator
In motion detection, the mask is red and movement behind a mask is ignored. The masking
behaves opposite to that of a motion search. In a motion search, the parts masked in green
act as triggers more than as a mask.
1. After preparing a motion search (see
Show / Hide mask button (
masking grid button (
2. Click on areas of the image where you need to exclude in a search for motion. As you
click, highlighted blocks appear (see
3. Show the masking commands by right-clicking the larger video image.
4. Click Invert Mask.
5. You have the option of saving the mask, along with other search options (see
and Repeating a Motion Search
Undo / Redo
The Undo and Redo commands apply to the Motion mask.
After preparing a motion search (see
optional motion options, click Search. A motion search report
Rapid Eye Remote View Operator Guide
Excluding an Area from a Search
Preparing a Motion Search
). You have the option of clicking the Show / Hide
).
Figure 5-6).
on page 74).
Preparing a Motion Search
on page 65).
on page 62), click the
Saving
on page 62), and using the
(Figure 5-7) is produced.
65