Peephole Access Control; Multi-Media Event Sources; Figure 6-10 Source Of Alarms - Honeywell Rapid Eye Operator's Manual

Peephole Access Control

Multi-Media Event Sources

1. Outside world
event, such as
detected motion.
2. Multi-Media unit
event, such as a
power outage.
A Multi-Media alarm
station can receive alarms
from many sources.
Document 800-07767 Rev A
02/11
The Multi SA sets the Multi-Media unit's input connected to the doorbell, to trigger an alarm
and sets up the site's Multi-Media unit to call an alarm station. The Run Live Alarm Session
on Alarm option can be disabled, as needed.
1. At a Multi-Media site that is setup as described above
when an alarm rings (see
2. If the alarm is from the input connected to the doorbell, acknowledge it (see
Session, page 85, for more information).
3. Start a Live video session to view the caller. Live video sessions are explained in
on page 29.
Video
4. Use the output that matches the door (see
page 90, for more information).
5. Rearm the alarm (see the following sections for more information).
Figure 6-10 Source of Alarms
Rapid Eye Remote View Operator Guide
Session, page 85, for more information).
Alarm
Controlling an Onsite Device Output
(page 90), run an alarm session
Alarm
3. Point-of-sales
(POS) event, such
as from an ATM.
4. View Operator
event, such as
unauthorized
use of a site.
Live
on
91