Transmission Installation - Honda 2004 Odyssey Service Manual

Transmission Installation

1. Flush the ATF cooler (see page 14-155).
2. Install the transmission lower mounts (A).
A
3. Install the torque converter assembly (A) on the
mainshaft (B) with a new O-ring (C).
D
A
C
4. Install the 14 mm dowel pin (D) and 10 mm dowel
pin (E) in the torque converter housing (F).
5. Place the transmission on a jack, and raise it to
engine level.
10 x 1.25 mm
38 N·m (3.9 kgf·m,
28 lbf·ft)
A
10 x 1.25 mm
38 N·m (3.9 kgf·m,
28 lbf·ft)
F
B
E
6. Attach the transmission to the engine, then install
the transmission housing mounting bolts.
7. Install the front mount bracket.
12 x 1.25 mm
64 N·m,
(6.5 kgf·m,
47 lbf·ft)
10 x 1.25 mm
38 N·m
(3.9 kgf·m, 28 lbf·ft)
(cont'd)
14-147