Cylinder Head Installation - Honda CH250 Elite 1986 Service Manual

prevent
CYLINDER HEADIVAtVES
Tap the valve stems gently with a plastic hammer as shown to
firmly seat the cotters.
CAUTION
.sunn,or! the cvl'inrler head above the
IVOJ-kitl}!
bench
valve
CYLINDER HEAD INSTALLATION
Clean any material from the cylinder surface.
Install the dowel pins and new
Install the cylinder head, the washers and cap nuts and
them in a crisscross pattern in two or more steps.
TORQUE: 22 - 26 N'm
(2.2-2.6
16-19 ft-Ibl
Install the into the groove of the carburetor insulator.
Install the insulator onto the cylinder head the two bolts.
Make sure that the vacuum tube fitting faces up.
6-12