Driven Pulley Assembly - Honda CH250 Elite 1986 Service Manual

DRIVE PULLEY/CLUTCH/DRIVEN PULLEY
Secure the retainer
with the circlips.
(21 RETAINER PLATE
DRIVEN PUllEY ASSEMBLY
(1)
DRIVEN FACE
(81 OIL SEAL
m
GUIDE ROLLER PIN
{51 OIL SEAL
Clean the faces.
Install the oil seals onto the movable driven face.
Coat the with grease and install them onto the
movable driven face.
4- 5 9
of grease to the inside of the movable driven
face.
Install the movable driven face onto the driven face.
Apply grease to the guide rollers and pins and install them into
the hole of the driven face.
8-14
(41 a-RINGS
(1) GUIDE ROLLER (2) GUIDE .."" ......
L.n
PIN
) a-RINGS