ALTERNATORISTARTER CLUTCH
Remove the set plate.
Remove the starter driven gear.
STARTER CLUTCH INSPECTION
Inspect the starter driven gear for wear or damage.
Measure the starter driven gear
to.
SERVICE LIMIT: 22.10 mm (0.870 in)
Inspect the starter idle gear and shaft for wear or damage.
Install the starter driven gear onto the one way clutch and
check for operation by turning the starter driven gear.
The starter driven gear should only turn in one direction.
10-4
I
(2) SHAFT
tiiii$i_• •
(1) STARTER DRIVEN
GEAR