• Gasket material will come off easier if it is soaked in sol-
vent.
Clean any
NOTE
material from the cylinder surface.
CYLINDER/PISTON
Inspect the cylinder bore for wear or dalmege.
Measure the
1.0. at three levels in X and Y axis.
SERVICE LIMIT: 72.10 mm 12.839 in)
Inspect the top of the cyiinder for warpage.
SERVICE LIMIT: 0.05 mm (0.002 in)
PISTON REMOVAL
Place clean shop towels in the crankcase oOfmirlO
or other parts from
falling
Remove the piston
with
Pull the piston
out of the piston.
keep the
crankcase.
7-3