Table of Contents
Advertisement
ALTERNATOR/STARTER CLUTCH
Install the spring and oil orifice.
STATOR INSTALLATION
Install the stator on the right crankcase cover with the three
bolts.
Install the pulse generator with the two screws.
Install the wire grommet in its groove in the cover securely.
NOTE
• Be
sure to route the stator wire under the pulse generator.
RIGHT CRANKCASE COVER
INSTALLATION
a neW gasket.
dowel
cr81nkcBlle cover over the crankcase, aligning
the oil pump shaft.
10-7
Advertisement
Table of Contents
Troubleshooting
