Honda CH250 Elite 1986 Service Manual page 108

Install the seal collar.
DRIVE PULLEYICLUTCH/DRIVEN PULLEY
Set the driven pully assembly, driven face spring and clutch as-
onto the clutch compressor.
the flat su'rface of the driven face with the flat on the
clutch drive plate.
Comp,re~;s
the tool and install the lock nut loosely.
Set the tool in
a
vice and the lock nut to the specified
torque.
TORQUE:
50-60
N-m
15.0-6.0
kg-m,
36-43
ft-Ib)
Remove the driven pulley/clutch assembly from the tool.
(2\ LOCK
NUT
WFIENCH
mm) 07916-9580300
Install the driven pullle.'fclutC:11 2issemblv ooto the drive shaft.
Install the clutch outer and tighten the nut while holding the
clutch outer with the universal holder.
Install the drive belt (page 8-41.
Install the left crankcase cover (page 8-3).
Install the removed parts in reverse order of the removal.
TORQUE: 50-60 N'm
15.0-6.0
36-43 ft-Ibl
8-15