Temperature Gauge - Honda CH250 Elite 1986 Service Manual

NOTE
• Oil must be used as the heated liquid to check the function
above 100°C (212°Fl.
• You'll get false readings if either the thermometer ,or
thermosensor touches the pan.
TEMPERATURE GAUGE
Disconnect the wire from the thermosensor and ground it to
the engine.
Turn the ignition switch ON.
The temperature gauge needle should move all the way to the
H (right).
CAUTION
• Do not leave the thermosensor wire grounded for longer than 5
seconds or the temperature gauge will be damaged.
ELECTRICAL EQUIPMENT
(1) THERMOSENSOR
#===="'i'I
16-21