Handlebar Removal - Honda CH250 Elite 1986 Service Manual

HANDLEBAR
REMOVAL
Remove the instruments (page 16-12).
Remove the wire band.
Disconnect the left handlebar switch wire coupler and connec-
tors.
Remove the two screws from the lower side of the left handle-
bar switch housing and remove the housing from the handle-
bar.
Remove the wire band.
Disconnect the handlebar switch wire coupler and con-
nectors.
Remove the two screws the right handlebar switch
housing and separate the housing.
Loosen the throttle cable adjuster.
Disconnect the front brake cable from the brake lever.
Remove the throttle cable from the throttle grip and remove
the
Remove the right handlebar switch hous.ing.
Loosen the lock on the right handlebar switch housing
and remove the cables from the switch housing.
Remove the steering stem nut, then remove the handlebar.
STEERING/FRONT WHEEL/BRAKE/SUSPENSION
(2) LOCK NUT WRENCH, 30
x
32
mm
07716-0020400
14-3