Rear Brake Light Switch; Horn; Fuel Unit/Gauge; Fuel Unit Inspection - Honda CH250 Elite 1986 Service Manual

ELECTRICAL EQUIPMENT
REAR BRAKE LIGHT SWITCH
Remove the frame center cover.
Disconnect the rear brake switch wire connectors from the
harness.
Check for continuity with the rear brake applied.
There should be continuity between WIG and GIY, and WIG
and G/R terminals.
HORN
Remove the headHghtCQvarifPage 13-5).
Disconnect the horn wire connectors.
The horn is normal ifit sounds when a
12
V battery is connect-
ed across the terminals.
Replace t/"Je horn
If
it does not sound with the application of 12
volts.
FUEL UNIT/GAUGE
FUEL UNIT INSPECTION
'85:
Remove the fuel unit (page 4-16).
'85:
Measure the resistance between the fuel unit wire terminals
with the float at the upper (FULl) and lower (EMPTY) posi-
tions.
After '85:
Remove the fuel unit (page 4-16).
Measure the resistance
betWl:l~nthf'lfu~tunit
Wire terminals
with the float at the.upper (FULLkandlower (EMPTY)posi-
tions.
UPPER (FULL) ._ •••'
\clVII"' I Y I
After '85:
24-420
450-750
n
409-7250
450-7500
24-c42n
409-7250
Yellow/White and
Blue/White
Green and
Blue/White
Green and
YellOW/White
16-19