Honda CH250 Elite 1986 Service Manual page 123

ALTERNATORISTARTER CLUTCH
Install the seven bolts and tighten them.
Connect the water hoses to the right crankcase Gover.
Install the three bolts to the oil pipe stay on the right crank-
case, water pump cover and cylinder head.
Install the oil pipe with
(3) 12
mm
PIPE BOLT
(GOLD)
(5) COPPER
oil bolts and sealing washers.
to the cylinder head side and silver
cremkCElISe side.
black and silver oil bolt.
• Install the black
oil bolt to
Do
NOTE
Install the right step and the right side rail (page 13-31.
Connect the pulse generator and alternator wire coupler and
connectors.
NOTE
• Route the wires properly (page 1-81.
• Fill the crankcase and final reduction to the proper level
with recommended oil{page 2-').
• Fill the cooling system(page 12-2). •
• Perform the following inspecetions and adjustments:
- oil leaks
- coolant leaks
10-8