Honda CH250 Elite 1986 Service Manual page 104

DRIVE PUllEYIClUTCH/DRIVEN PUllEY
Pull out the roller pins and rollers.
Remove the movable driven face from the driven face.
ROLLER ROLLER PIN
SERVICE LIMIT: 94.0 mm 13.10 inl
Measure the driven face spring free
for darnal;18 or loss of tension, and re-
Check the clutch
place if necessary.
Check the driven face assembly for wear or dalTlage.
Measure the driven face O.D.
SERVICE LIMIT: 39.94 mm 11.512 in)
Check the be,arirlgs for play.
Replaced the if they are
(page 8·12).
or have excessive play
Check the movable driven face for wear or scoring.
Measure the movable driven face I.D.
SERVICE LIMIT: 40.06 mm
11.577
in)
Check the groove for
stepPE~d
wear.
Check the oil seal and for or wear.
Relllar:e if necessary.
8-11