Front Cover; Brush Holder - Honda CH250 Elite 1986 Service Manual

ASSEMBLY
(1) FRONT COVER
ELECTRICAL EQUIPMENT
Assemble the starter motor.
Compress the brushes into their holders, and slip the brush
holder over the commutator.
Slide the commutator I brush holder into the motor case.
Align the case notch with the brush holder
NOTE
• Be sure the proper number of thrust washers, as prE1VicJusly
noted, have been on the shaft before installation of
the rear cover
(1)
TAB
(2) BRUSH HOLDER
Install the rear cover aligning its slot with the brush holder pin.
16-11