Fuel Unit; Fuel Tank Insulator - Honda CH250 Elite 1986 Service Manual

FUEL SYSTEM
FUEL UNIT
For fuel unit inspecti,on, see page 16-19.
unit arm. • Do not
CAUTION
REMOVAL
Remove the left side cover and lift the seat up.
Di~;connlE!ct the unit wire connectors.
Turn the fuel unit retainer counterclockwise and remove the
fuel unit.
INSTALLATION
Set the fuel unit onto the fuel and align the groove
on
the fuel unit base with the tab on the fuel tank.
Install the fuel retainer by turning it clockwise.
Make sure that the arrows are
Clllld'''~U.
R ..
,,,nlnl",,,,,,,t
the wires and reinstall the left rear cover.
REMOVAL
Remove the and left rear covers and body center cover
(section 13j
Disconnect the fuel tube and vacuum tube from the fuel valve.
Remove the seat.
Disconnect the fuel unit wire connectors.
Remove the four fuel tank bolts and fuel tank.
INSTALLATION
Install the fuel tank in the reverse order of removal.
FUEL TANK
Il"\h':1VI...M
Remove the fuel tank.
Remove the right or left rear shock absorber 15-8).
Remove the screws mounting the fuel tank insulator and the
insulator.
(11 SCREW
(31
(2) FUEL TANK
INSULATOR
4-16