Cisco 6921 Administration Manual page 106

Configuring Softkey Templates
Table 5-2 Configurable Softkeys (continued)
Feature
Do Not Disturb
End Call
Group Pickup
Hold
Hunt Group
Join
Malicious Call
Identification
Meet Me
Mobile Connect
New Call
Other Pickup
Quality Reporting Tool
Redial
Remove Last Conference
Participant
Resume
Speed Dial
Transfer
Video Mode Command
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
5-22
Configurable Softkeys in the
Softkey Template
Configuration
Toggle Do Not Disturb
(DND)
End Call (EndCall)
Group Pick UP (GPickUp)
Hold (Hold)
HLog (HLog)
Join (Join)
Toggle Malicious Call
Identification (MCID)
Meet Me (MeetMe)
Mobility (Mobility)
New Call (NewCall)
Other Pickup (oPickup)
Quality Reporting Tool
(QRT)
Redial (Redial)
Remove Last Conference
Participant (Remove)
Resume (Resume)
Abbreviated Dial
(AbbrDial)
Direct Transfer (DirTrfr)
Video Mode Command
(VidMode)
Supported as a
softkey on
Cisco Unified
IP Phone 6921, 6941,
6945, and 6961 Notes
No Configure Do Not Disturb as a
programmable line button.
Yes Phone displays Cancel if the call is not
answered.
Yes —
No Hold is a dedicated button.
Yes Configure Hunt Group as a
programmable feature button.
No —
No Configure Malicious Call Identification
as a programmable feature button.
Yes —
No Configure Mobile Connect as a
programmable feature button.
Yes Phone displays New Call.
Yes —
No Configure Quality Reporting Tool as a
programmable feature button.
Yes —
Yes Phone displays Remove when a
participant is selected.
Yes —
Yes Phone displays SpeedDial.
No Transfer is a dedicated button.
Configure transfer (Direct Transfer
policy) in the Product Specific
Configuration Layout section in Phone
Configuration.
No —
Chapter
OL-24567-01