Required Fng Service Configuration Information; Required Egress Context Configuration Information - Cisco ASR 5000 Series Administration Manual

▀ Configuring the System to Perform as a Femto Network Gateway
Required Information
Encrypted PSK (required for
the PSK authentication
method)
IKEv2 transform set name(s)
IPSec transform set name(s)
Crypto template name(s)

Required FNG Service Configuration Information

The following table lists the information that is required to configure the FNG service.
Table 7. Required Information for FNG Service Configuration
Required Information
FNG service name
AAA group name
IP address of the FNG
loopback interface
Crypto template name

Required Egress Context Configuration Information

The following table lists the information that is required to configure the egress context.
Table 8. Required Information for Egress Context Configuration
Required Description
Information
Egress context An identification string from 1 to 79 characters (alpha and/or numeric) by which the egress context is
name recognized by the system.
IP pool A logical name for the IPv4 address pool, which must be from 1 to 31 alpha and/or numeric characters.
▄ Cisco ASR 5000 Series Femto Network Gateway Administration Guide
38
Description
When the Pre-Shared Key (PSK) method is used for FAP authentication, the encrypted PSK to be
used.
The name(s) of the IKEv2 transform set(s) to be used.
The name(s) of the IPSec transform set(s) to be used.
The name(s) of the IKEv2 crypto template(s) to be used.
Description
The name of the FNG service, which must be from 1 to 63 alpha and/or numeric characters. The FNG
service name can be the same across all FNG services within the same context and across all contexts.
The name of the AAA group to be used for FAP authentication.
The IP address of the FNG loopback interface configured in the FNG context.
The name of the crypto template to be used.
Femto Network Gateway Configuration
OL-24872-01