Monitoring System Status And Performance - Cisco ASR 5000 Series Administration Manual

▀ Monitoring System Status and Performance

Monitoring System Status and Performance
This section contains commands used to monitor the status of tasks, managers, applications and other software
components in the system. Output descriptions for most of the commands are located in the Statistics and Counters
Reference.
Table 9. System Status and Performance Monitoring Commands
To do this:
View FNG Service Information and Statistics
View FNG service information
and statistics
View FNG service session
information
View additional session
statistics
View FNG service bulk
statistics
View IPSec and IKEv2 Information
View IPSec security
associations
View IKEv2 security
associations
View crypto map configuration
information
View IPSec session recovery
status
View IKEv2 statistics
View Congestion Control Information
View congestion control
statistics for FNG
View Subscriber Information
Display Session Resource Status
View session resource status
Display Subscriber Configuration Information
▄ Cisco ASR 5000 Series Femto Network Gateway Administration Guide
60
Enter this command:
show fng-service { all [ counters ] | name service_name |
statistics }
show fng-service session [ all | callid call_id | counters |
full [ all | callid call_id | ip-address ip-address | peer-
address ip_address | username name ] | ip-address ip-address |
peer-address ip-address | summary [ all | callid call_id | ip-
address ip-address | peer-address ip-address | username name ] |
username name ]
show session [ disconnect-reasons | duration | progress |
setuptime | subsystem ]
show bulkstats variables fng
show crypto ipsec security-associations
show crypto ikev2 security-associations
show crypto map map-type ipsec-ikev2-subscriber
show ipsec session recovery status
show crypto statistics ikev2
show congestion-control statistics ipsecmgr
show resources session
Monitoring the FNG Service
OL-24872-01