Connecting With Keyboard Wedge - Honeywell Voyager 1200g User Manual
Single-line laser bar code scanner
Hide thumbs
Also See for Voyager 1200g:
- User manual (238 pages) ,
- Quick start manual (13 pages) ,
- User manual (222 pages)
Table of Contents
Advertisement
4.
Verify the scanner or base operation by scanning a bar code from the
Sample Symbols
The unit defaults to a USB PC Keyboard. Refer to
terminal settings.
For additional USB programming and technical information, refer to "USB
Application Note," available at
Connecting with Keyboard Wedge
A scanner or base can be connected between the keyboard and PC as a
"keyboard wedge," where the scanner provides data output that is similar to
keyboard entries. The following is an example of a keyboard wedge con-
nection:
1.
Turn off power and disconnect the keyboard cable from the back of the
terminal/computer.
Connect the appropriate interface cable to the scanner and to the terminal/computer.
in the back of this manual.
www.honeywellaidc.com.
only if
power
supply is
included
page 2-5
for other USB
1 - 3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
