Object Detection Distance; Character Activation Mode; Activation Character - Honeywell Voyager 1200g User Manual

Object Detection Distance

When the scanner is in the stand and you are using Object Detection
Mode, you can set the distance range for detecting objects. Short sets the
scanner to detect objects approximately 5 inches (12.7cm) away from the
nose. Long sets it to detect objects approximately 10 inches (25.4cm)
away. Default = Short In-Stand, Long Out-of-Stand.
* Short
In-Stand
Out-of-Stand

Character Activation Mode

You may use a character sent from the host to trigger the scanner to begin
scanning. When the activation character is received, the scanner continues
scanning until either the
deactivation character is received (see
or a bar code is transmitted. Scan the following On bar code to use character
activation, then use Activation Character (following) to select the character you
will send from the host to start scanning. Default = Off.
* Off

Activation Character

This sets the character used to trigger scanning when using Character
Activation Mode. On the
A-4, find the hex value that represents the character you want to use to
4 - 14
Short
Character Activation Laser Timeout
ASCII Conversion Chart (Code Page
Deactivation Character
Long
In-Stand
* Long
Out-of-Stand
(page 4-15), the
on page 4-16),
On
1252), page