Wincor Nixdorf Terminal Default Settings - Honeywell Voyager 1200g User Manual

Note: If you are having unexpected results with this programming code, scan
the Activate Defaults
programming code above.

Wincor Nixdorf Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nix-
dorf terminal. This bar code sets the baud rate to 9600 bps and the data format
to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan
the Activate Defaults
programming code above.
NCR Bioptic Settings
bar code on page 1-9 first, then scan the
Wincor Nixdorf Terminal Settings
bar code on page 1-9 first, then scan the
2 - 11