4
Input/Output Settings
Power Up Beeper
The scanner can be programmed to beep when it's powered up. Scan the Off
bar code(s) if you don't want a power up beep. Default = Power Up Beeper On
- Scanner.
Power Up Beeper Off -
Scanner
* Power Up Beeper On -
Scanner
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host.
If you scan the following Beep on BEL On bar code, the scanner will beep
every time a BEL character is received from the host. Default = Beep on BEL
Off.
*Beep on BEL Off
Beep on BEL On
4 - 1